Aluminum foil tape has really begun to have large-scale production in our country, starting in 1958, and entering the 1980s, the development of aluminum foil tape has a climax.

With the improvement of people's living standards, there are higher requirements for packaging, especially sales packaging, such as the exquisite packaging of tobacco, wine, medicine, cosmetics and so on that we have seen. Adhesives for laminating and laminating industry are also constantly developing, usually solvent-based or emulsion-based adhesives such as E-VA, polyurethane, polyester, etc. are used, and solvent-based laminating adhesives are organic solvent-based aluminum foils. For tape, the solvent used is generally toluene, mineral spirits, etc., accounting for more than 60% of the total aluminum foil tape.

Aluminum foil tape has many characteristics such as wide application, easy use, high economic efficiency and rapid development. With the development of economy and technological progress, it will become more and more people's attention and become an industry with great development prospects.

In order to achieve the purpose of beautifying the packaging, a film should be applied to the packaging printed matter. The film can increase the gloss and make it more eye-catching without changing the original tone of the printed matter, and can be moisture-proof, wear-resistant, etc., so as to be effective The ground protects the inner layer.

Therefore, during the operation, it not only pollutes the environment and endangers the health of workers, but also may cause fires. With the emphasis on environmental protection at home and abroad, printing companies are urged to choose aluminum foil tapes that can not only meet the quality requirements, but also meet the environmental requirements.

It can be seen from the application structure that the packaging industry is the largest industry in the application of aluminum foil tape. It is widely distributed in various fields of the packaging industry such as paper products, printing and decoration, and plastics. At the same time, with the development of the aluminum foil tape industry, packaging products have also been improved. The quality and grade of this product have promoted the development of the packaging industry.

Many friends are a little confused about aluminum foil paper and aluminum foil tape. In fact, this difference is very big!

Aluminum foil:

Aluminum foil paper is paper with paper texture characteristics without glue, with aluminum foil on the outside and paper on the inside. The use of aluminum foil paper is very wide. It is widely used in packaging industry, aviation food packaging, ordinary meat packaging, cigarette packaging, etc.

At the same time, aluminum foil paper is widely used in construction. Pasting on the surface of thermal insulation materials makes construction more convenient and clean, especially the aesthetics has reached a new height. However, the effects of different types of aluminum foil paper are very different. For example, fireproof and ordinary aluminum foil tapes are not the same grade:

The aluminum foil tape has an outer layer of aluminum foil and an inner layer of sensitive adhesive. The biggest difference with aluminum foil: aluminum foil tape is sticky!

Aluminum foil tape is made of high-quality pressure-sensitive adhesive composite aluminum foil, which is divided into with release paper and without release paper. The characteristics are: good adhesion, strong adhesion, anti-aging and so on. The heat preservation performance is very superior! The specifications are (0.014mm-0.125mm)*various widths and lengths.

The aluminum foil tape is used for the joint bonding of all aluminum foil composite materials, the sealing of the puncture point of the insulation nail, and the repair of the damaged part. It is the main raw and auxiliary material for the refrigerator and freezer manufacturers, and it is also the necessary raw material for the insulation material distribution department.