The PET protective film of the liquid crystal display device is very afraid of static electricity, so the smaller the static electricity of the protective film, the better. If you can feel the electrostatic induction on your skin by the PE protective film, and then charge static electricity, please try again on the screen Apply and slow down the protective film to reduce the generation of static electricity bit by bit. If the size of the protective film is larger, the static electricity will be stronger. Of course, there are also some Japanese brands (such as the full range of products are Japanese Fuji Pinyin antistatic treatment) how to tear will not generate static electricity, so high-end Apple users specify materials. There is a good connection. Because our film is a daily life in a general environment, and there is a lot of dust in the air, if the static electricity of the protective film adsorbs the surrounding dust on the protective film, a large number of bubbles will be generated in the film. For the production process, it is more convenient to use anti-static materials if the protective film is not anti-static and easy to get dirty.

The pass degree of PET protective film can reach 99%, and the anti-reflective effect of the best AR film can reach 95%, and the light transmittance of the highest end of the bright surface reaches 92%, so don’t believe those boxes are at the so-called 99% transmittance. Light rate; personal protective film (such as anti-bacterial protective film, color, colored edge paste, three-dimensional ray engraving or diamond protector, etc.): This is an era of innovation, only you can't think of, without them (companies, factories, etc.) ) No, you will know slowly!